| SPEED |
Up to 1131 mm/sec (44 in./sec) diagonal |
| ACCELERATION |
Up to 3 g diagonal |
KNIFE
PRESSURE |
0-400 grams, in 5-gram increments |
| RESOLUTION |
0.025 mm, 0.1 mm selectable (Metric)
0.001 in., 0.005 in. selectable (English) |
| REPEATABILITY |
Within +/- 0.1 mm (0.004 in.) on plots:
up to 8 m (26 ft.) long on rolls up to 760 mm (30 in.) wide
up to 4 m (13 ft.) long on rolls over 760 mm (30 in.) wide |
TOOL
COMPATIBILITY |
Standard D-Series knife for vinyl, reflective and fluorescent films
Thick material D-Series knife for sandblast resist and other thick films
Pen for plotting on paper
Pounce tool (optional) for pouncing on paper |
MEDIA
WIDTH |
12 to 127 cm (2.8 to 50 in.) |
MEDIA
LENGTH |
50 m (164 ft.) maximum |
| MEDIA THICKNESS |
Up to 0.25 mm (0.01 in.) with standard knife
Up to 0.8 mm (0.03 in.) with thick material knife |
| CUTTING AREA |
123 cm x 50 m (48.4 in. x 164 ft.) |
| MEMORY |
16 MB |
| INTERFACE |
USB 1.1 and Serial RS-232C |
| LANGUAGES |
Summa DM/PL, HP-GL or HP-GL2
(with selectable origin HP7475 and HP 7580/7585) |
POWER
REQUIREMENTS |
100-120 / 220-240 Vac, 48-62 Hz, 85 VA maximum |
OPERATING
ENVIRONMENT |
15° to 35° Celsius (59° to 95° Fahrenheit) |
ASSEMBLED
DIMENSIONS |
112 x 160 x 68 cm (44.1 x 63 x 26.8 in.) |
SHIPPING
WEIGHT |
62 kg (114 Lbs.) |
STANDARD
ACCESSORIES |
Deluxe stand with media basket
OPOS X optical positioning sensor
Long-plot media feed rollers
Media roll-end flanges (2)
Drag-knife blade holder
Standard blades (2)
Fibre-tip pen (1)
USB cable
Summa Cutter Control software
WinPlot cutting software
MacSign Cut cutting software
Coupy slitter and blades (2)
User guide (PDF file on CD)
Quick Start guide
Power cable |
OPTIONAL
ACCESSORIES |
Thick material blade holder
Thick material blades (5-pack)
D-Series pounce kit |
