| TYPE |
75 cm (30 in.) drag-knife, friction feed |
| SPEED |
Up to 1000 mm/sec. (40 in./sec.) axial;Up to 1414 mm/sec. (56 in./sec) diagonal |
| ACCELERATION |
Up to 4 g axial;
Up to 5.5 g diagonal |
| KNIFE
PRESSURE |
0-600 grams, in 5-gram increments |
| ADDRESSABLE
RESOLUTION |
0.025 mm, 0.1 mm selectable (Metric)
0.001 in., 0.005 in. selectable (English) |
| REPEATABILITY |
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40 ft.) long |
| TOOL
COMPATIBILITY |
Standard knife for vinyl, reflective and fluorescent films;
Thick material knife for sandblast resist and other films up to 1.2 mm (0.047″) thick;
Double-tip knife for heavy-duty matetials;
Ballpoint pen for plotting on paper;
Pounce tool for pouncing on pape |
| MEDIA
WIDTH |
6 to 84 cm (2.4 to 33 in.) |
| MEDIA
LENGTH |
50 m (164 ft.) maximum |
| MEDIA THICKNESS |
Up to 0.25 mm (0.01 in.) with standard knife;
Up to 1.2 mm (0.047 in.) with thick material knife;
Up to 0.25 mm (0.01 in.) with double-tip knife |
| CUTTING AREA |
74.2 cm x 50 m (29.2 in. x 164 ft.) maximum |
| MEMORY |
16 MB |
| INTERFACE |
USB 1.1 and Serial RS-232C |
| DISPLAY
LANGUAGES |
English; French; German; Dutch; Italian; Spanish; Polish |
| CUTTER
LANGUAGES |
Summa DM/PL, HP-GL or HP-GL2 (with selectable origin ; HP7475 and HP 7580/7585) |
| POWER
REQUIREMENTS |
100-240 Vac, 48-62 Hz, 85 VA maximum |
| OPERATING
ENVIRONMENT |
15° to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
| DIMENSIONS
(W x D x H) |
141 x 68 x 111 cm (55.5 x 26.8 x 43.7 in.) |
| SHIPPING
WEIGHT |
69 kg |
| OTHER
FEATURES |
OPOS X contour-cutting alignment system
Stand with adjustable front and rear media baskets
Media supply rollers with media end flanges
Media cutoff system
Automatic interface selection
Selectable origin
Variable knife-tip offset (0-1 mm / 0-0.04″)
8 user-definable configurations
Autoload feature
Adjustable pinch roller pressure
Dual protection strips (cut and pounce)
Overcut feature (for easier weeding)
Flex-cut feature (for cutting completely through the media) OptiCut and TurboCut performance enhancement modes (when operating in drag-blade mode)
Vector look-ahead
Curve and arc smoothing
Diagnostic routines |
| ACCESSORIES
INCLUDED |
2 standard knife blades and standard nose peice
1 thick material knife and thick material nose piece
Blade holder for standard, thick material and double-tip knife (requires matching nose piece)
Ballpoint pen with pen holder
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian, Spanish and Dutch)
User’s manual and drivers on CD-ROM
Summa Cutter Control software (for controling cutter settings)
WinPlot (PC) and MacSign Cut (Mac) cutting programs |
