Supplies
SummaCut |
 |
||
|
|
Standard tangential knife holder used with tangential knives, standard nose piece (395-348) required |
395-322 | |
|
|
Tangential drag knife holder used to hold drag knives in tangential cutters, drag knife nose piece (395-330) required |
395-323 | |
|
|
Tangential Ballpoint holder used to hold tangential ballpoint pen (395-325) |
395-324 | |
|
|
Tangential pouncing pin holder used to hold poincing pin (391-592) |
395-315 | |
|
|
Standard nose piece used in conjuction with standard knife holder (395-322) and 36° blades |
395-348 | |
|
|
Drag knife nose piece used in conjuction with drag knife holder (395-323) and drag knife blades |
395-330 | |
|
|
Sandblast nose piece used in conjuction with standard knife holder (395-322) and sandblast blades |
395-347 | |
|
|
Standard tangential knife 36° knives for standard vinyl material up to 0.25 mm (or 0.01 in.) (5 pack) |
390-534 | |
|
|
Sandblast knife 60° tangential knife for thicker material up to 1.2 mm (or 0.047 in.) |
390-550 | |
|
|
Tangential double tip knife 36° double tip knife for standard vinyl material up to 0.25 mm (or 0.01 in.) |
390-551 | |
|
|
Ceramic knife 36° ceramic knife |
390-552 | |
|
|
Pouncing pin | 391-592 | |
|
|
Tangential ballpoint pen | 395-325 | |
|
|
Tangential knife install tool | 390-553 | |
General Accessories |
|||
|
|
Razor blades Used in Razor blade holder or S Class cut-off knife (10 pack) |
391-146 | |
|
|
Razor blade holder | 391-290 | |
|
|
Razor blade holder with foot | 391-295 | |
|
|
|||
|
|
Set of 2 Core holders 3″ cores |
391-510 | |
|
|
USB cable 5 m cable A/B interface black |
399-311 | |
|
|
Serial cable DB9S-DB9S |
423-183 | |
|
|
CD-ROM Manuals & drivers |
MD9045 | |
Cutting strips |
|||
|
|
Cutting strip - series 500 to 760 | 391-386 | |
|
|
Cutting strip - series 1010 to 1300 & S75 & S120 & D1000 | 391-886 | |
|
|
Cutting strip - series 1400 to 1600 & S140 & S160 | 400-565 | |
| Pouncing strip 5 m | 391-598 | ||
